Re: Farmall M runs and dies update. . .how to clea

Posted by Wayne Swenson on June 17, 2005 at 09:16:13 from (64.175.87.250):

In Reply to: Farmall M runs and dies update. . .how to clean fu posted by nositri on June 16, 2005 at 15:33:05:

I would suggest using a couple handfulls of hex nuts & lockwashers for an abrasive medium. You can get them out with a magnet later and not have more dirt & sandy material in the tank.
Several suggestions below on how to shake the takn.
Take the sediment valve & grind a small groove in the pipe that extends into the tank so you can wrap a "sock" of metal screening around the pipe and wire it in place. No more large chunks of garbage into the system & the sediment bowl will trap the rest.
When the tank is thoroughly clean you can also use a tank liner to seal any minute leaks.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]