Farmall & IHC Tractors Discussion Board |
Re: farmall hydraulic fluid
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Janicholson on June 08, 2005 at 19:16:34 from (66.173.50.74):
In Reply to: farmall hydraulic fluid posted by Mike Sardo on June 08, 2005 at 19:02:24:
On the right side of the tractor below the front of the fuel tank, and on top of the main casting of the tractor (called a torque tube) there is a tall knob/breather. It is shaped like a bakers hat, but is not flopped over. It is screwed onto the fill hole nipple. If there is a bunch of plumbing there it is still the correct place to fill. There should be a dip stick on a washer under it. If not the depth to fluid is (I believe) about 9" below the top of the threads on the nipple closest to the tractor casting. If there is a resevoir on the frame of the loader, or mounted seperately on the tractor, I would fill there. One caution, if there are one way cylinders, the oil volume should be checked with the loader down, or there will be oil everywhere when it is let down. JimN
Follow Ups:
Home
| Forums
Today's Featured Article -
A Farmall Story - by Ed Meadors. The year was 1978. Our young family had recently moved to rural Chesapeake, Virginia to a plot of land which would finally allow us to realize our dreams of a huge garden, critters and more lawn and pasture than we would ever use! We needed a TRACTOR; not a riding mower or tractor wannabe, but a real TRACTOR. The answer to our needs materialized in the form of a '44 Farmall A, complete with cultivators, discs, single plow, a 5ft.Woods belly mower and one, mounted spare 9.00x24 rear wheel.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|