Re: TD6 Swapping From A injection pump to B

Posted by n9lhm on June 08, 2005 at 05:12:17 from (69.215.51.175):

In Reply to: TD6 Swapping From A injection pump to B posted by Dennis Freytag on June 07, 2005 at 19:12:43:

1. The line on the big nut (plunger input) comes from the output of the primary (last) filter.
2. That is the drain. B pumps don"t scavenge waste fuel from the inside of the pump case back to the tank because (supposedly) the inside tolerances were tighter and it didn"t need it. Mine goes to a 6" length of copper tube and down out of the frame. It does drip a drop of fuel occasionally.
Any more questions, my e-mail is open...... Brian

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]