Re: 1943 Farmall H - Wide vs Narrow frontend

Posted by captaink on June 02, 2005 at 06:34:59 from (66.115.214.56):

In Reply to: 1943 Farmall H - Wide vs Narrow frontend posted by ChrisL on June 01, 2005 at 16:07:36:

I�m going to add my nickel�s worth. A narrow front will plug easier if you are working in muddy conditions especially if in a feed lot. A wide front will only drop one wheel in a hole (half the weight and half as far) as a narrow front, thus less of a bump. Narrow fronts have the habit if you hit an obstacle with one of the wheels to �spin� the steering wheel out of your hands, which can be at the least a disturbing thing, at the most break bones. Because of the nature of a wide front, after a tractor tips to a point, the front end will hit a �stop� which will offer some resistance to a complete upset, but it is not by any means a fool proof roll over prevention. As others have said narrow fronts have some advantages too. As far as safety, the operator is the most important part and a good understanding of the laws of physics especially weighting and wheel spacing will go a lot further in preventing an accident than the wide front will.

My nickel�s worth.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]