|
Farmall & IHC Tractors Discussion Board |
Re: why no frame on 230?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hugh MacKay on May 29, 2005 at 03:06:28 from (216.208.58.144):
In Reply to: why no frame on 230? posted by Randy in Pa on May 28, 2005 at 20:44:08:
Randy: Those tractors, ( C, SC, 200, 230 and 240 ) were designed for row crop work. Most of the unused threaded holes in front casting as well as torque tube were designed for mounting cultivators, planting and fertilizing equipment. Problem came when these tractor became popular with other farmers. Livestock farmers loved these tractors, particularly small livestock farmers. They were economical to buy and also to operate. For the livestock farmer they would do just about every task he could ask of a tractor. They were capable of much heavier work than ever designed for. They did the farmers row crops, baled hay, spread manure and yes even loader work. I know a farmer who when tractor was new, would bolt 1/2" plate from clutch housing to front casting. He would mount these plates using the threaded holes in those castings, esentially giving tractor the kind of strength through engine area as the larger Farmalls. Some of the activity that broke these tractors was, loaders, towing was bad, a reckless guy towing you with another tractor would let chain come loose then not bother to tighten it gently again, probably 6' of loose chain and hits you at about 4mph. I'd be willing to bet this last one has broke more small tractors than loaders ever did. I have never owned one but the smaller A, SA, 100, 130 and 140 have much the same castings. I have never broke one. There were a lot of these tractors in my area and a lot got broken. I know of one 200 that broke when kid let it run into a concrete wall to stop. (new driver) All other broken tractors I know of both sizes, A and C or their derivitives were broke towing them. So you see there were guys 50 years ago without much common sence. At least with big tractors they just broke the chain.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
More Memories of a Field Service Engineer - by Brian Dye. Introduction: The author worked for one of the largest Ford tractor dealerships in England as a trouble-shooter on tractor engines, hydraulics and combine harvesters from 1963 to 1972. In 1972 he became a dealer manager and finally left the dealer net in 1975 to run his own electronic design and manufacturing company. [Editor] We live right in the middle of Norfolk. The dealership that I worked for sold Fordson Tractors from the 1920's and some of t
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|