Re: Super A worksaver 3pt

Posted by Haas on May 17, 2005 at 18:29:29 from (12.65.19.165):

In Reply to: Super A worksaver 3pt posted by Bill in VT on May 16, 2005 at 13:58:05:

The Super A with the 3 point will lift only about 500 lbs, maybe a little more. A four ft bush hog is about all you would want on the Super A. You will also need an over running clutch for the PTO. Will the set up work with the bush hog?? Good chance of a conflict with the PTO shaft and the lift parts of the 3 point hitch, or the frame parts of the bush hog. I had a Work Saver 3 point on a 140 years ago. Lift range and capacity are limited. I used it with a carry all, a small disk, a pond scoop, a blade, etc. The only PTO powered thing I used was a hole auger. That worked fine after I adjusted the center link of the hole digger to shorten it so I could lift it high enough. I also modified the top link connection on the tractor making one of my own design, as the one provided by Work Saver bolts to the rear rockshaft and was not very satisfactory in my opinion.

Follow Ups:

• Re: Super A worksaver 3pt Bill in VT 04:44:15 05/18/05 (1)
  • Re: Super A worksaver 3pt Haas 07:06:11 05/18/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]