1066 shift lever

Posted by scot_c on May 15, 2005 at 19:58:30 from (162.39.3.30):

had to pull part of the hood back off a 1066 tonight- the bolt that holds the hi/lo/rev lever came out. I have to wonder how my cousin tightened it as there are no threads (that I could see, it was getting dark) left in that block on the shaft that the bolt threads into. It is strange though because I can wiggle the bolt a little this way and that then pull it straight out. Right now we need it so something needs done. I had to leave that hood section off so we can screw that bolt back in once we shift. IS there any tricks to getting the other lever and the reverse slide off that shaft to get the block off? Is that peice still available from CIH?

Follow Ups:

• Re: 1066 shift lever MN Scott 20:43:15 05/15/05 (0)
• sorry about the double post scot_c 20:00:21 05/15/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]