Re: H belly pump rebuild

Posted by kfox on May 15, 2005 at 14:29:30 from (63.18.237.17):

In Reply to: H belly pump rebuild posted by Tailhunter on May 15, 2005 at 12:49:56:

I know what you mean! Just went through the same thing yesterday. I ruined the "store Bought gasket" wiggiling the pump around trying to get the control shaft in the slot on the pump. I made a new gasket and waited until I got the thing in place, and then worked the new gasket over the pump. Wasn't as hard as trying to get things togather and trying not to tear up the gasket. I layed the reservor on its back, and put the pump in from the top. Then cock the pump toward the control shaft and just wiggle it around. I think the secret is you just gotta hold yopur mouth right. ken

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]