Re: 1466 HYD

Posted by Yellott Canby on May 10, 2005 at 18:51:27 from (205.208.129.147):

In Reply to: 1466 HYD posted by forgetit 27946 on May 10, 2005 at 10:44:23:

Hello, Are the arms stuck in the up postion? I had this happen on my 1466. The arms stuck up and would not come down. Had to take the top link holder of which opens up to the main rear housing. There was a spring loaded piece there that had come of its holder, had over extened.Seems like it happened when I lowered the arms. This happened several times until I welded a bolt on the spring loaded piece to keep it from over extending and it works fine now. Kind of a hard thing to describe and probably only is relevent if the arms are stuck in the up position. Good luck

Follow Ups:

• Re: 1466 HYD forgetit 27946 19:31:20 05/10/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]