TD6 injection pump questions

Posted by Dennis Freytag on May 10, 2005 at 18:24:40 from (64.136.27.227):

Just put the original engine back in my TD6 after the WD6 engine I had in it opened up an old crack in the block. When I started it up it ran great on gas but the A injection pump was not working. rack was frozen and distributor block rusty. Plenty of pressure on fuel gage. So I took the distributer block and barrel out of the WD6 injection pump (also an A) and put it in the TD6 thinking I would not have to retime it. When I started it back up on gas, it blew out a steady cloud of diesel this time. I tried adjusting the control arm, but that was not the problem. When I change over to diesel it still puts out a steady cloud and seems to run at too high rpms ( no way to test) It also does not respond to the throttle and seems to run at the one speed, but possibly speeds up a little. Is there an adjustment that can be made underneath the oil filler? Thanks

Follow Ups:

• Re: TD6 injection pump questions n9lhm 07:00:14 05/11/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]