Re: Farmall H Exhaust Manifold

Posted by captaink on May 09, 2005 at 13:42:07 from (66.115.214.56):

In Reply to: Farmall H Exhaust Manifold posted by Tweeter on May 07, 2005 at 17:02:21:

Do not pull it to try to break it loose. It�s too easy to bend something. :<(

Put it in 5th gear and get on the rear wheel and rock it instead. Put your favorite rust eating concoction in the cylinders and rock it every time you walk by it. (If you put it by the house this should be very often!) :>] If you are lucky it will break loose in a few days. If you loose patience, then start pulling the engine apart.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]