H to SH Clutch Question

Posted by Slappy on May 04, 2005 at 15:04:13 from (64.12.117.13):

I am rebuilding my '44 H, and sometime in the past my original flywheel was replaced with a Super H flywheel. I didn't figure this out until after having the flywheel balanced and re-surfaced and finally finding a friction disk that fit. Now everything is back together, and although I can adjust the clutch rod to get the 1 -1/8" free movement, I have almost no ability to adjust for wear, i.e., the rod is nearly as long as I can make it.

Does anyone know if the SH adjustment rod is longer and if it will fit an H? It sure would be cheaper to replace the rod than to get a new flywheel, etc, etc.

Thanks.

Follow Ups:

• Re: H to SH Clutch Question DWV 18:16:16 05/04/05 (0)
• Re: H to SH Clutch Question captaink 15:41:29 05/04/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]