Re: SA hydraulic problem

Posted by CNKS on May 04, 2005 at 06:07:24 from (204.249.178.138):

In Reply to: SA hydraulic problem posted by mchief on May 03, 2005 at 23:32:33:

The others are correct. However, if the shaft is grooved, you can put a speedy sleeve on, about $25, as replacing the seal may or may not solve the problem. Some pumps have a regular seal, others have an o-ring. If yours has the o-ring, you have to have the hole the shaft goes thru enlarged to accept the speedy sleeve -- I did that on mine. Best to let a machine shop do it so that it is correct. Or, there are procedures to build up the shaft. This has to be more than a simple brazing operation, and has to be one that does not get the shaft so hot so that it loses it's temper. I vote for the speedy sleeve.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]