Re: Hyd On a SM For Dummies

Posted by captaink on May 02, 2005 at 09:38:05 from (66.115.214.56):

In Reply to: Hyd On a SM For Dummies posted by MagMan on April 30, 2005 at 11:00:07:

Industry standard is pull back to raise, if your valve has a �float� position where the lever stays in you will want to plumb it so that the �lower� position is on the same side of the neutral position as the float position, so you don�t lower and then have to go through the raise position to float.

Otherwise you could hook it up the other way if your preference is have it that way. The pump and cylinders won�t care�

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]