Re: Can you...

Posted by captaink on May 02, 2005 at 08:08:51 from (66.115.214.56):

In Reply to: Can you... posted by SuperCmore on May 02, 2005 at 07:02:45:

I have to agree with Jay. I know that I�d like to check out the rest of the pump, relief spring etc while I had the pan off. You might even want to shake the rods a bit to make sure you don�t have some real excessive clearance in a rod bearing. (I�m presuming that the reason you pulled the pan is that you had low oil pressure.) While you�re in there you might want to check out the crankshaft bearings too.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]