Re: IH 460 Deisel gear sequence

Posted by P Backus on April 30, 2005 at 21:05:57 from (69.128.32.152):

In Reply to: Re: IH 460 Deisel gear sequence posted by Raffoboo on April 30, 2005 at 18:38:26:

Is the engine stuck from sitting? Could be something in the valve
train that's hung up. Is it possible that a cylinder got filled with
fuel, antifreeze, water, or oil? If so, you will bend or break a rod
or more by forcing it to turn over.
I guess if it was mine, I'd take the injectors out and turn the
motor over with a wrench. any excess fluid would come out of
the injector holes. If it's not that, take off the valve side cover
(tappet cover) or the valve top cover (rocker arm cover) to see if
the valves are all free.
Cowman's right : a person needs to know why it's not turning
before pulling it. Maybe you'll be lucky and it will just be the
starter or solenoid! LOL.
Paul

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]