Re: Axle ratios, continued

Posted by CNKS on April 28, 2005 at 15:07:25 from (204.249.178.138):

In Reply to: Re: Axle ratios, continued posted by onefarmer on April 28, 2005 at 12:41:29:

You are correct about the factory cooler being in the "cooler" tank -- however, about as many people say bypass it as say run it through the tank, so I don't know. I'm switching to synthetic oil which is "supposed" to take the heat better, and am probably adding another larger cooler in series with the existing one. Haven't checked on the lockup kit yet. I think I will eventually get it cooled down. I don't own a trailer, if I did the best way to see what works is to try each thing separately by towing one of my tractors around locally for a while, rather than the shotgun approach I'll probably use.

Follow Ups:

• Re: Axle ratios, continued onefarmer 09:17:16 04/29/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]