|
Farmall & IHC Tractors Discussion Board |
Re: Axle ratios, etc
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by onefarmer on April 27, 2005 at 08:21:59 from (209.153.128.248):
In Reply to: Axle ratios, etc posted by CNKS on April 26, 2005 at 13:54:15:
Hey there, I have a 94 c1500 w/4.3 and 4L60E So I know how you feel only more so with the 4.3 I think going to the 3.73 gears would be the best compromise between daily driving and occasional towing. It would cure your lockup issue daily driving and when towing provide better gears not the best but better. Just use direct drive for less strain on the converter. The converter slipping is where the heat comes from. If you didn't already, get the biggest tranny cooler you can find, then plumb the lines to go thru the radiator first then the cooler for the best cooling. It won't be the best for towing but is the best compromise. I have a 85 Astro w/4.3 and 700r4 and I haul 120 bales of hay every weekend and it is under powered but tranny stands up fine in drive. In OD it would die a quick death from the heat.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Memories of a Farmall C - by Monty Bradley. When I was a child, my grandparents lived on a farm owned by a Mr. Walters. The crops raised were cotton and soybeans, with about forty head of mixed breed cattle. Mr. Walters owned two tractors then. A Farmall 300 on gasoline and a Farmall C, that had once belonged to his father-in-law, and had been converted from gasoline to LP Gas. Many times, as a small boy, I would cross the fence behind the house my grandparents lived in and walk down the turn row to where granddaddy would be cultivati
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|