Re: Help w/Drill!!!!!!

Posted by Kelly C on April 23, 2005 at 10:38:18 from (63.171.43.140):

In Reply to: Re: Help w/Drill!!!!!! posted by Allan in NE on April 23, 2005 at 07:55:59:

I figured it out. There is 2 gears running the grass seeder with a cam inbetween them. When you raise the drill the cam is suppose to seperate the gear keeping the grass seeder from spining. Cam is worn so that the 1/2's dont seperate fully.
I pulled the cam over a little and wired if to keep the gears open. I drove it over with my 460 in 3rd gear nice and slow.
Cold as heck out today chilled me to the bone. Wind blowing about 20 mph.
to windy to drill and drop grass seed???
I dont know maybe I will do it tomorow.

Follow Ups:

• Re: Help w/Drill!!!!!! sprout 12:28:08 04/23/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]