Re: Super A 12V resistors

Posted by captaink on April 21, 2005 at 08:56:27 from (66.115.214.56):

In Reply to: Super A 12V resistors posted by Jeb2N on April 21, 2005 at 07:11:03:

Depending on how original you want to keep this tractor, you can get a DPDT (double poll, double throw) flip switch from Radio Shack or an automotive store. This switch has two separate circuits in it; you use one circuit for the ignition and the other for the exciter wire to the alternator. This way you don�t need a light or diode, :>) but the switch will not look original either. :<(

You could also wire in a DPDT relay between the original switch and the ignition/exciter wires. The original switch would power the relay which would in turn activate the two circuits coming out of it. That would keep originality on the switch, but will add another mechanical part (relay) and cost to the wiring.

Just giving you options�

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]