Re: Super H brake adjustment

Posted by r4etired on April 20, 2005 at 19:06:23 from (205.188.117.138):

In Reply to: Super H brake adjustment posted by Hendrik Alberts on April 20, 2005 at 14:45:41:

If you have a super H then you have disc brakes.There are two discs inside each brake casting, You will see how it works when you take it apart,Clean the expanders and the balls real well.If the balls don't measure real close to 875 thousands replace them. Several brake shops are relining the disc if they are the rivet type, using a little thicker lining to compensate for the wear.If ther is evidence of any oil on your discs replace them. Never found it on the super H but super M and the 400,450 a lot of times the brake shafts have to be filed to smooth the grooves were the discs slide

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]