Re: Woodruff key on PTO

Posted by captaink on April 20, 2005 at 16:40:55 from (66.115.214.56):

In Reply to: Woodruff key on PTO posted by J.D. Palmer on April 20, 2005 at 16:03:23:

If the PTO gear does not fit snug on the shaft, this will lead to easier shearing off of the key. Unfortunately, the only way to correct a loose gear on a shaft is to replace the worn parts. You could try using a softer shear bolt to see if that will take some of the �jar� off the PTO when the shear bolt breaks. It�s tempting to take them to a machine shop and have the key cut out oversize. That might keep it from shearing off, but may cause damage to something else further into the drive line.

Maybe someone else here has some ideas�

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]