Re: Farmall H won't start once warmed up

Posted by Hermit on April 16, 2005 at 19:49:48 from (69.21.48.45):

In Reply to: Farmall H won't start once warmed up posted by Ohio Mark on April 16, 2005 at 14:34:38:

Something a lot of people don't check. If you have low compression combined with thin oil. This will cause the pistons not to seal properly and the cylinders won't develop enough pressure to fire. The way to check this is to pull the plugs and squirt some oil into the cylinders and see if it fires up.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]