Re: transmission brake adjustment 806

Posted by JJK on April 16, 2005 at 16:48:05 from (216.189.131.59):

In Reply to: transmission brake adjustment 806 posted by Larry B. 1466 on April 16, 2005 at 16:34:07:

If its grinding to much to put it in gear it needs to be tightened up. If it don't want to go into gear then it needs to be loosened up. The best I can describe the adjustment is when you push the clutch pedal all the way down, count to three, and put the lever into gear and the gears will grind lightly and stop to shift into gear. Then when you let the clutch out to let the tractor creep ahead a little push the clutch pedal back in and the tractor should roll back and the shift lever will come out of gear easily. If not then loosen the tranny brake 1/2 turn or so.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]