Re: thinning IH red paint

Posted by Gauger on April 16, 2005 at 16:10:34 from (63.184.168.54):

In Reply to: thinning IH red paint posted by Jonathan Mirgon on April 16, 2005 at 05:56:51:

I use the Case IH thinner at the maximum recommended reduction of 8:1, paint to thinner. I use a Devilbiss JGA cup gun at about 45 psi and it flows out like glass. I did the same with my old Craftsman gun with same results. Fiddle with the air on a piece of scrap till you get it right and always paint when the atmospheric pressure is high. Don't ask me why but it makes a difference.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]