Re: Servicing IH model 600D

Posted by P Backus on April 16, 2005 at 11:11:50 from (69.128.32.152):

In Reply to: Re: Servicing IH model 600D posted by Richard Harvey on April 16, 2005 at 04:13:42:

Well Richard,
I looked in my parts manual, owners manual, and I&T manual
and found nothing. So I went out and looked at the real deal and
can find nothing there either. I even took out the three lowest
cap screws on the cover hoping that one of them was not a blind
hole and would serve as a drain. Alas, no such luck.
It looks like you're right: it will have to be sucked out. Of course
you could take the cover off the side, but I wouldn't want to go
through all that work. You could just knock a hole in the side
with a chisel! Warning: this may void the warranty. LOL!
I have one of those tools that looks like a grease gun. It's one of
those things that you think will work better that it does.
However, when I think about changing the oil in my steering
box, I think that is what I'd use.
I realize that you are no farther ahead on this than before, but at
least I learned something!
Paul

Follow Ups:

• Re: Servicing IH model 600D Richard Harvey 05:31:49 04/17/05 (3)
  • Re: Servicing IH model 600D P Backus 10:50:59 04/17/05 (2)
    • Re: Servicing IH model 600D Richard Harvey 12:12:47 04/17/05 (1)
      • Re: Servicing IH model 600D P Backus 21:33:45 04/17/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]