Re: E85 and an H

Posted by ChadS on April 13, 2005 at 20:20:33 from (4.224.132.45):

In Reply to: E85 and an H posted by riverbend on April 13, 2005 at 19:54:38:

I use it in all my pulling tractors, which in coincidence, all letter series farmalls. To make it work corectly for your particular engines characterisics, like compression ratio, and jet size in the carb. Compression pressures 100-135psi use a 75% gas and 25% of the E85. 135 to 200 you can make it more of a 60-65% gas 30-35% E85. You will have to rejet the carb, it will use more of it. But, it makes power, kinda an added bonus if you get it right. E85 can sit for a spell,, long as it is sealed, away from water. Will eventually ruin the rubber tip on the needle, if you can find a needle that was steel, you would be fine. Hope this helps,, ChadS

Follow Ups:

• Re: E85 and an H RustyFarmall 04:45:43 04/14/05 (2)
  • Guide for E85 and Farmall's ChadS 08:03:53 04/14/05 (1)
    • Re: Guide for E85 and Farmall's David A. Hodson 16:29:48 04/14/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]