Re: H air cleaner removal

Posted by John in Ct on April 10, 2005 at 18:53:28 from (69.24.45.51):

In Reply to: H air cleaner removal posted by Kent in NB on April 10, 2005 at 05:56:42:

I had mine off the other day. It can be done by one man but it is MUCH easier with 2. Take the hood off. On the carb side, use a socket with extension (can't remember if we used a flex or not because I was on the other side with a regular Snap-On combination wrench). I used the open end side of the wrench. The only problem you may have will be that you can't get the wrench on the nut because of the nuts position. No problem, hold your open end wrench against the nut, have your helper turn from the other end(off direction). The bolt and nut will turn together. When the right angle is reached, your wrench will just slip onto the nut and your helper can unscrew it. I hope this helps.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]