Re: W6 Brake Adjustment

Posted by chadd on April 07, 2005 at 05:13:37 from (155.92.30.54):

In Reply to: W6 Brake Adjustment posted by Yugrotcart on April 06, 2005 at 18:15:22:

Are these new brakes or used brakes? If they are used, then my guess would be that the band is worn down too far to adjust any more. On the other hand, if these are new bands, something didn't get assembled right. If the bands are new, are they from a Case IH dealer or are they aftermarket? I have heard some bad things about aftermarket bands being the wrong length, so that there isn't enough adjustment to make them work. We had a similar problem with our W6, but it was because someone had broken the shaft that twists the band and welded at the wrong angle with respect to the shaft, so it was about 45 degrees off, not allowing it to tighten the band enough. Took quite a while to figure that one out. . .

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]