Re: 560 gear shifter leaking

Posted by dvtw on April 05, 2005 at 06:01:27 from (199.209.144.60):

In Reply to: Re: 560 gear shifter leaking posted by migraine on April 04, 2005 at 21:23:47:

The triangle fill plate next to the shifter probably does need a new gasket. I'll probably do that now that you mention it. But the shifter seems to be getting hydraulic fluid coming out of the base. Its seeping up the stick a couple of inches. The rear end has the right amount of fluid it but wouldn't the gears turning cause that fluid to slosh around enough to find it's way out through the gear shifter? I figured there was an o-ring or felt washer in there somehow. I wondered if anyone had ever changed it out and how to get the shifter off. I noticed there is a dowel pin holding the lever to the base but I don't want to get it stuck in a gear or mess it up by taking it off. I figured somebody must have had one off before or it might be similar to an M shifter.
Thanks for the response.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]