Re: Splitting stands

Posted by greywynd on April 02, 2005 at 22:02:12 from (209.226.236.173):

In Reply to: Splitting stands posted by FarmerSid on April 02, 2005 at 15:36:36:

Last one I did I had a hydraulic pallet jack available. I placed a couple of heavy timbers across it, and a bottle jack on them to support the tranny housing. The pallet jack was long enough to reach from behind the tractor up underneath to maintain a straight line when rolling the 2 halves apart. The pallet truck is nice and wide, lots of stability. It also gives lots of options for adjusting the height. Rolled the rear half back, put a support stand under it, and let the jack down. Worked great for me.

Mark

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]