M clutch question

Posted by Glen E. on March 25, 2005 at 16:25:10 from (152.163.101.13):

I just bolted the block back up to the clutch housing. I hooked up the clutch linkage and it does not feel right. There is a lot of pedal travel before the throwout engages the clutch. Then the clutch does not release before the pedal bottoms out. I unhooked the pedal and used a cheater on the clutch lever and it released just fine.

It's a completely new clutch. Do I just need to lengthen the rod to the pedal? is there some internal adjustment to be made?

I don't want to put the block together anymore until I get this straightened out in case I have to pull it back apart. I can drop the belly pump and get to it if I need to, I guess.

Follow Ups:

• Re: M clutch question P Backus 18:07:59 03/26/05 (0)
• Re: M clutch question Chris Brown 07:14:45 03/26/05 (0)
• Re: M clutch question Bob M 18:44:40 03/25/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]