Re: ether injection on 1086

Posted by Larry806 on March 23, 2005 at 20:39:58 from (209.143.47.93):

In Reply to: ether injection on 1086 posted by fry on March 23, 2005 at 18:36:15:

Throw that ether injection system as far as you can But only after you have taken a sledge hammer to it. I worked at a IH dealer years ago we had to use a torch on 3 new tractors to melt the pistions ( what was left of them) out to rebuild the motors. Electric ether system stuck on. Oldest tractor had a little over 100 hours on it. One was a 766 with 5 hours on it

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]