Re: determining the right rebuild kit

Posted by MAgMan on March 23, 2005 at 05:05:31 from (205.188.117.73):

In Reply to: determining the right rebuild kit posted by jnewark on March 23, 2005 at 04:26:13:

Seems to me that that # should start with an L or F The J is a suffex for Rockford clutch or someting that was a option or specialty of the tractor like they had one for Gas, Kero Clutch, Lower or high Gears, get the pic. Your tractor should have came stock with 4" pistons unless the motor has been changed out and then it would say 281 instead of 264 on the block. In the last 50 years someone probly aded M&w kit or IH fire crators or something to the old girl. So its up to you weither you go back to 4" or stay with the 4 1/8. But just ask for a kit with the SM 500XXX check the block to make sure on the RH side that it is a 264 CI cause I dont think the 4" sleeves will fit if its a 281 CI block. And tell who ever that info also. JON

Follow Ups:

• Re: determining the right rebuild kit jnewark 05:41:21 03/23/05 (1)
  • Re: determining the right rebuild kit MagMan 06:10:25 03/23/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]