Re: Exhaust manifold Tap

Posted by Haas on March 22, 2005 at 16:29:26 from (12.65.60.194):

In Reply to: Exhaust manifold Tap posted by Freud on March 22, 2005 at 16:19:40:

It's standard two inch size pipe threads. Nominal size 2 inch pipe is larger than 2 inches in diameter, as I recall about 2 3/8 inch OD. You can get 2 inch NPS pipe tap at about any hardware supply house. Not cheap for a good one though. You could try to borrow one from a plumber. Also I think Northern tool has some cheapo ones that should be good enough to do your rethreading.

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]