Re: Farmall M clutch

Posted by Andy Martin on March 17, 2005 at 11:28:56 from (64.219.39.195):

In Reply to: Re: Farmall M clutch posted by captaink on March 17, 2005 at 09:48:18:

Good description.

I might add that the bolts in the coupling can be a bear to get out, and the first time you try you'll swear the pressure plate will not come out. Clean the interior of the cavity because you have to touch both sides at once to get it wiggled out and back in. If I recall right it seems that the input shaft needs to stay in the pressure plate and clutch plate and they all three come out together. It is a little bit of a Chinese puzzle but much easier and faster than splitting the tractor because of the pieces up top you have to disconnect to split.

Follow Ups:

• Re: Farmall M clutch chadd 12:01:46 03/17/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]