Re: Allan NE

Posted by captaink on March 15, 2005 at 12:35:10 from (66.115.214.56):

In Reply to: Allan NE posted by GeorgeH on March 15, 2005 at 11:21:09:

One thing is for sure, the further forward the mounts are placed on the frame rails; the less likely you will be to damage the rail. Allen’s picture with the trusses reminded me that it is a good idea to check the bolts holding the torque tube (the casting between the engine and the transmission) on each end to make sure they are tight especially when you have a loader on the tractor. I replaced mine once just as a safety precaution, Allen takes in one step further by adding the trusses to take some of the stress off the tube. The torque tube is a known area for failure when loaders are installed on the letter series tractors.

Follow Ups:

• Re: Allan NE Allan in NE 12:49:14 03/15/05 (1)
  • Re: Allan NE captaink 14:46:01 03/15/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]