Re: removing the engine from a B

Posted by riverbend on March 10, 2005 at 05:56:54 from (208.160.33.10):

In Reply to: removing the engine from a B posted by GKTX on March 09, 2005 at 20:00:33:

A couple of safety related points - 1)Apply and lock the rear brakes before you start. You do not want it to try and roll away while the front end is off. 2) Do not use 2X6s as 'crutches' to support the torque tube. A lot of the wood out there is junk. If they have wind shakes or those monster knots, they can split. Use steel (like 2" pipe or better) or solid cribbing under the tube. No sense getting squashed.

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]