Re: upper bolster bushing help on farmall M

Posted by Randy SE-MN. on March 08, 2005 at 05:33:44 from (206.9.216.76):

In Reply to: upper bolster bushing help on farmall M posted by Biff on March 07, 2005 at 06:05:27:

Mine went in difficult too, but it did go. I lubed everything and took my time. The real challenge was the upper seal, that I did eventually ruin. I had Napa cross the number and came up with a seal that was only half as thick as was originally sent me. I built an "installer" out of ready thread and then double sealed the shaft with the thinner seals...

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]