Re: trying to identify

Posted by farmallhal on March 07, 2005 at 16:14:12 from (64.24.35.16):

In Reply to: Re: trying to identify posted by John Gray on March 07, 2005 at 16:06:55:

John, 1944 is correct for the N code. The Farmalls being made in that year were the A, B, H and M series tractors. Start with providing the location of the steering shaft - is it on the right side or in the center of the tractor? Are the front wheel close together or almost as wide as the rear ones? Can you you see a size on any of the tires? These are starters and we'll go from there. Hal

Follow Ups:

• Re: trying to identify John Gray 16:40:28 03/07/05 (4)
  • Re: trying to identify farmallhal 17:00:06 03/07/05 (3)
    • Re: trying to identify John Gray 17:10:46 03/07/05 (0)
    • Re: trying to identify John Gray 17:10:04 03/07/05 (1)
      • Re: trying to identify farmallhal 17:27:05 03/07/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]