Re: upper bolster bushing help on farmall M

Posted by Andy Martin on March 07, 2005 at 06:15:39 from (64.219.39.195):

In Reply to: upper bolster bushing help on farmall M posted by Biff on March 07, 2005 at 06:05:27:

They are tough to get in.

If you did not peen over the end of the bushing it should go on in with a puller. Lubricate the remaining bore good with a penetrating lubricant.

Make a screw puller preferably with a stepped plate to keep the screw centered on the bushing. I've used a 1" screw with acceptable results.

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]