Re: Farmall 706 310d sleeves

Posted by El Toro on March 02, 2005 at 14:41:24 from (64.12.117.13):

In Reply to: Re: Farmall 706 310d sleeves posted by Trent R. Young on March 02, 2005 at 12:32:39:

Hi Trent, The pistons in that engine should measure somewhere around 3.875". Using 3/4 all-thread will pull those sleeves easily. You will
need either a piece of heavy channel or 3/4 flat stock with clearance for the all-thread. You can use a cutting torch for the hole. You will need
a couple of 4X4 to set the channel on, so the sleeve will clear the block. Hal

Follow Ups:

• Re: Farmall 706 310d sleeves Trent R. Young 17:00:12 03/02/05 (1)
  • Re: Farmall 706 310d sleeves El Toro 12:57:51 03/03/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]