H and M Lights.

Posted by Gordo on February 19, 2005 at 14:48:05 from (64.68.166.234):

Going through six lights to make three for the 49 H.
Have two different lenses. One is smooth on the outside, has the "Guide Tractor Light" lettering
and "TOP" on it. The third is a cut glass finish on the outside, little squares, and you can read
"Guide" at bottom, and "Top" at the top. Both are same diameter. Was one for the rear light? More diffussion? The cut glass lens looks older.
HAs anyone ordered lenses from OEM or anyone else. Where can you get the correct "Guide Tractor lens" marked lens?
Which bulb is higher amp? 1129 or 1133? They both fit in the sockets.
And last, where can I get reflectors recoated. OEM has new ones for 18 dollars but it seems they can be remirrored for less than that. Somewhere I had a company that would do that but I lost it.
I'm going to have two as new restored Guide front lights left over if anyone needs one
TIA
Gordo-SD

Follow Ups:

• Re: H and M Lights. Gordo 18:51:58 02/19/05 (0)
• Re: H and M Lights. Gordo 18:51:45 02/19/05 (0)
• Re: H and M Lights. Nebraska Cowman 17:29:34 02/19/05 (0)
• Re: H and M Lights. RustyFarmall 14:59:05 02/19/05 (1)
  • Re: H and M Lights. Gordo 18:04:46 02/19/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]