Re: farmall B torque specs

Posted by El Toro on February 14, 2005 at 17:59:26 from (64.12.117.13):

In Reply to: farmall B torque specs posted by jedh on February 14, 2005 at 16:30:09:

If the B has cotter pins in the rod nuts they recommend 40-45 ft-lb. If the rod haave lock nuts the recommend 43-49 ft-lb.

They recommend 75 ft-lb on the main bearings and 65 ft-lb on the head torque. I see they recommend
up to 80 ft-lb on the head in some manuals. I used 65 ft-lb on the Farmall A that restored and never had any leakage problem. Hal

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]