Re: 560 Power Steering

Posted by Aces on February 14, 2005 at 08:53:32 from (4.164.18.82):

In Reply to: 560 Power Steering posted by red paint gotta pull on February 13, 2005 at 18:51:38:

Red the warm shaft in the front bolster much move in and out a little in order the activate the valve. Some times the fine spline on the warm can rust tight, some times they ware bad and get pined rather than replaced. This can work but then the steering shaft must move back and forth all the way to the steering wheel. At ant rate the warm shaft muct be able to move in and out a little for the valve the operate.

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]