Re: Paint stripper

Posted by CNKS on February 11, 2005 at 18:28:51 from (204.249.178.138):

In Reply to: Paint stripper posted by r4etired on February 11, 2005 at 18:13:53:

Cast is porous. When washed thoroughly with a pressure washer afterwards, it shouldn't be a problem. Being somewhat impatient, it never sits more than 30 minutes or so. I used it on the tractor I am currently working on, but I also used a phosphoric acid product to prevent rust and etch the metal, along with a wire brush on an angle grinder, followed by several hand applied applications of wax and grease remover to get the cast clean (PPG DX 330). I don't expect any problems. If the paint comes off, you can say "I told you so".

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]