Re: Increasing hydraulic capacity

Posted by Hermit on February 10, 2005 at 21:44:21 from (69.21.48.48):

In Reply to: Increasing hydraulic capacity posted by Ludwig in Pa on February 10, 2005 at 14:48:27:

Have you tried fully compressing the actuators then adding extra fluid to the reservoir? Then check to see how far the actuators will extend. That way the fluid won't overflow out the vent. If I needed more fluid, I'd think about putting another reservior next to the gas tank with a line running down to the lift-all's fill pipe and the vent on top of the new reservoir. The fill pipe's diameter is larger than the drain plug so the fluid should flow faster.

Follow Ups:

• Re: Increasing hydraulic capacity Ludwig in Pa 04:11:23 02/11/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]