Re: SUPER M CHARLYNN POWER STEERING PARTS

Posted by Bob M on February 10, 2005 at 05:41:07 from (151.190.254.108):

In Reply to: Re: SUPER M CHARLYNN POWER STEERING PARTS posted by Bob Frey on February 10, 2005 at 04:46:00:

Far as I can tell the M gage plate in Allan’s photo below is the same as the one for a Super M. And the reason the tank support casting broke on yours is because the coupling at the front of the steering motor had been welded solid. (The front coupling is a combination universal joint and slip joint)

Anyway replacement front coupling are available. I purchased a new one a couple years ago thru Bates Corp. Price was about $80 as I recall. (The rear coupling is the stock IHC steering shaft U-joint)

Note! You gotta have both the coupling and U-joint in place and working. Otherwise the motor will experience excessive thrust and side loads from the steering shaft and cause damage to both the motor and the mounting bracket, just as you discovered.

Follow Ups:

• Re: SUPER M CHARLYNN POWER STEERING PARTS Norm in Alabama 13:35:21 02/10/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]