Re: Upper Bolster Pivot Shaft Seal Replacement

Posted by Bob M on February 08, 2005 at 06:16:47 from (151.190.254.107):

In Reply to: Upper Bolster Pivot Shaft Seal Replacement posted by Farmall Frank on February 08, 2005 at 05:27:03:

Frank - I"ve found that even replacing that seal does not always cure a leaky steering box.

An easier solution is to simply drain any oil remaining in the steering box then pack it full with good wheel bearing grease. Grease will lube the worm and gear as well as oil, and it won"t leak out of a bad pivot shaft seal.

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]