Re: Can you stand another oil pump question?

Posted by ddg on February 06, 2005 at 06:37:26 from (152.163.101.13):

In Reply to: Re: Can you stand another oil pump question? posted by Irv on February 06, 2005 at 00:44:45:

When I took it apart, the cover plate was warped in several directions. The only contact places it had left were at the bolt holes. It looked like it was bulged out between the holes. I was able go flatten it out with a copper hammer, then get it smooth by sanding against a glass plate. The gears had both contacted the plate. What makes them warp like that? Is it the weight of the shaft & gears bouncing against the cover, or is it years of pressure from cold starts with thick oil?

Follow Ups:

• Re: Can you stand another oil pump question? scott2 13:00:57 02/07/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]